- DIN Mount Solid State Power Controller
- Utilizes 1x Crydom SPF480D25 SIP solid-state relay
- DC input (4-15Vdc), zero-crossing 600Vac / 10A output @ 40C
- Narrow 0.9" wide design to accommodate high-density applications
- LED input-status indicator
- Agency approvals; UL, CSA, VDE/TUV, and CE
HBC-11-SPF4825
Additional Information:
Discount Codes:
HBC500 - Enter promo code on checkout to receive a 5% discount on orders ≥$500.
HBC1K - Enter promo code on checkout to receive a 10% discount on orders ≥$1,000.
Please submit a quote request form for volume pricing ≥50 pieces.
In Stock - product normally ships within 24 hours
Shipping: All website orders >$100 are eligible for free UPS Ground shipping within the United States
International Shipping: HBControls ships internationally to all non-sanctioned countries
Condition: New / Unused
Product Datasheet: HBControls -11-SPF Compact Power Controllers
Product Description:
The HBC-11-SPF4825 is a Crydom PCB mount SPF480D25 solid state relay mounted in a compact, 0.9” (23mm) DIN mount carrier. The HBC-11-SPF4825 / SPF480D25 power controller / solid state relay is capable of switching 10 amp loads at line voltages between 48Vac and 660Vac, making it an ideal solution for high-density applications requiring relatively high-power switching in a compact environment. The output circuit of the HBC-11-SPF4825 utilizes rugged back-to-back SCRs (inverse-parallel) to switch load current, which enables them to perform reliably for millions of hours in harsh industrial applications. The specified MTBF for the HBC-11-SPF4825 is >7 million hours when operating in a 60°C ambient environment, and increases to >11 million hours in a 40°C ambient.
The input of the HBC-11-SPF4825 accepts control signals between 3Vdc and 15Vdc and pulls <15mA @ 5Vdc. Since the SPF480D25 solid state relay only requires a minimal amount of input current, they are commonly used to switch power to/from larger electromechanical relays and contactors in applications with low-power control circuits. An internal optical isolator provides 4kVrms dielectric protection between the AC mains and personnel / control circuitry. The zero-crossing output circuit will only trigger the output SCRs when the AC mains passes through the zero-crossing point of the sine wave. This greatly minimizes surge currents and reduces the level of conducted emissions generated by the solid state relay.
Typical applications for the HBC-11-SPF4825 include resistive heating, motor loads and other inductive loads with a power factor ≥0.5. They are commonly used as stand-alone solid state relays, or as a supplement to control boards or PLCs with limited outputs.
Additional DIN mount PCB solid state relays can be found in the Compact Power Controller section of our website.
Please contact our technical support team at 800.879.7918 / support@hbcontrols.com if you’d like more information on the -11 series compact power controllers, or if you’d like to discuss other products available from HBControls and your specific application requirements.
