- 70mm DIN-mount single-phase solid-state contactor with integrated fan
- 85A load current rating for line voltages between 42-600 VAC in a 40°C ambient environment
- Zero-crossing output switching reduces initial inrush current
- 20-275Vac / 24-190Vdc input voltage range with LED input status indicator
- Integrated over-voltage transient protection on the output
- Integrated fan with over temperature protection
- IP20 touch-safe housing for added safety
- Relay load terminal configuration: output terminals located on the same side of the contactor
- Designed in accordance with EN/IEC60947-4-2, EN/IEC60947-4-3, EN/IEC62314, UL508, and CSA C22.2 No. 14-13
- 100 kA short circuit current rating per UL508
- cULus Listed, CE Compliant
HBC-1Z60A85UF 70mm 85A / 42-600Vac, AC/DC Input Air-Cooled Solid-State Contactor
Additional Information:
Discount Codes:
HBC500 - Enter promo code on checkout to receive a 5% discount on orders ≥$500.
HBC1K - Enter promo code on checkout to receive a 10% discount on orders ≥$1,000.
Please call or submit a quote request form for volume pricing ≥50 pieces. We typically respond same day with pricing and availability.
Shipping: All website orders >$100 are eligible for free Ground shipping within the United States
International Shipping: HBControls ships internationally to all non-sanctioned countries
Warranty: Additional information is available on the Policies page of our website.
Product Datasheet: HBC-1Z Series Solid-State Contactors
Product Description:
The HBControls HBC-1Z60A85UF is a compact, low-profile 17.5mm solid-state contactor with an integrated DIN-mount heat sink. UL and cUL listed, this contactor is rated for 85 amps at 42-600 VAC in ambient temperatures up to 40°C, with a linear derating to 55 amps at 70°C. Installation-ready, the HBC-1Z60A85UF requires no additional thermal calculations, heat sink selection, or in-house assembly.
The HBC-1Z60A85UF supports control voltages from 20-275Vac or 24-190Vdc, featuring an LED indicator to display input signal status. When controlled by a DC control signal, the input current draw is <10mA @ 24Vdc, making it ideally suited for use with a PLC or similar low-power control circuits.
The integrated fan in this air-cooled solid-state contactor is programmed to activate when the SCR die temperature approaches its maximum safe limit. Once the SCR temperature falls below 80°C, the fan will automatically turn off. If the SCR die temperature continues to rise after the fan engages—due to excess load currents or unusually high ambient temperatures—the contactor’s output will automatically shut down at the maximum safe temperature threshold. At this point, the alarm output will activate, alerting the system to the overheating issue.
Its zero-crossing output circuit uses durable back-to-back (inverse parallel) SCRs, designed to withstand harsh industrial and commercial conditions. The circuit also minimizes initial inrush current by maintaining an off state until the AC sine wave is near zero-crossing, enhancing overall performance and stability.
The HBC-1Z60A85UF is a direct drop-in replacement for the Carlo Gavazzi RGC1A60A90GGUP.
Additional features and benefits of the HBC-1Z60D85UF include:
- Integrated output over-voltage transient protection
- IP20 touch-safe housing
- Compliance with EN/IEC60947-4-2, EN/IEC60947-4-3, EN/IEC62314, UL508, CSA 22-2 No. 14-13
- 100 kA short-circuit current rating according to UL508
- cULus Listed and CE Compliant
For more technical information, please consult the datasheet, or contact our technical support team at support@hbcontrols.com / 800.879.7918.
