- 70 amp panel mount stripwire solid state relay heat sink assembly
- Utilizes 1x HBControls HBC-D6090 (Crydom CMD6090) solid-state relay
- 4-32Vdc input
- Zero-crossing, 48-660Vac / 70A output @ 40C
- Thermally efficient heat sink to maximize overall product life expectancy
- Direct-bond copper (DBC) substrate for superior thermal performance
- Direct-power lead-frame design reduces solder joints and enhances reliability
- Touch-safe housing
- EMC compliant, level 3
- Agency approvals; UL, CSA, VDE/TUV, and CE
- Available Options: Overvoltage Protection (-M), Instantaneous Turn-On (-10), Current Transducer (-CT). Additional options are provided in the product datasheet.
HBC-690CHDN DC Input, 70 Amp / 48-660Vac Stripwire Solid State Relay Assembly
Additional Information:
Discount Codes:
HBC500 - Enter promo code on checkout to receive a 5% discount on orders ≥$500.
HBC1K - Enter promo code on checkout to receive a 10% discount on orders ≥$1,000.
Please submit a quote request form for volume pricing ≥30 pieces.
In Stock - product normally ships within 24 hours
Shipping: All website orders >$100 are eligible for free ground shipping within the United States
International Shipping: HBControls ships internationally to all non-sanctioned countries
Condition: New / Unused
Product Datasheet: HBControls C Series Stripwire Power Controllers
Product Description:
The HBC-690CHDN is a ready-to-use Crydom CMD6090 (HBC-D6090) solid state relay pre-assembled onto a thermally efficient, panel mount “N” series heat sink. The HBC-690CHDN power controller assembly is fully derated to switch AC loads up-to 70 amps at line voltages between 48Vac and 660Vac in a 40°C ambient temperature. This eliminates the need to perform any thermal calculations or heat sink selection. Furthermore, since the CMD6090 is already assembled onto a specific, custom-designed heat sink, mounting torque and the application of thermal compound are no longer concerns.
The input of the HBC-690CHDN / CMD6090 solid state relay accepts control signals between 4Vdc and 32Vdc and requires <20mA of source current @ 5Vdc to trigger the output semiconductors. The input and output of the solid state relay are optically isolated, providing 4kVrms dielectric protection between the AC mains and personnel / control circuitry. An LED input-status indicator allows for easy visual identification of the status of the solid state relay input circuit.
The output circuit of the HBC-690CHDN / CMD6090 solid state relay utilizes two SCRs configured in inverse-parallel, ideally suited for switching power in harsh industrial environments. Both SCRs are mounted to a direct bond copper (DBC) substrate to maximize thermal efficiency between the SCR junctions and the base plate of the solid state relay. The zero-crossing output will not trigger the output SCRs when an input signal is applied until the AC supply passes through the zero crossing point of the sine wave. This greatly reduces inrush current through the load and reduces the level of conducted emissions coupled onto the AC mains.
Box-clamp terminals can accommodate bare wires up-to 8 gauge for the output and 12 gauge for the input.
Typical applications include resistive heating loads, motor loads, and other inductive loads with a power factor ≥0.5.
Additional features and benefits of the HBC-690CHDN / CMD6090 solid state relay include:
- Direct-bond copper (DBC) substrate for superior thermal performance
- Direct-power lead-frame design reduces solder joints and enhances reliability
- IP20 touch-safe housing
- EMC compliant, level 3
- Agency approvals; cURus Recognized, CE
Please see the datasheet for additional options, or feel free to contact our technical team at support@hbcontrols.com / 800.879.7918.
