top of page
  • Panel mount solid-state relay (Crydom CMA6090)
  • 90-140Vac input
  • Zero-crossing 48-660Vac / 90A output
  • Direct-bond copper (DBC) substrate for superior thermal performance
  • Direct-power lead-frame design reduces solder joints and enhances reliability
  • IP20 touch-safe housing
  • EMC compliant, level 3
  • Agency approvals; cURus Recognized, CE

HBC-A6090 (Crydom CMA6090), AC Input, 90 Amp / 48-660Vac Solid State Relay

SKU: HBC-A6090
$159.28Price
  • Additional Information:

    Discount Codes:

    HBC500 - Enter promo code on checkout to receive a 5% discount on orders ≥$500.

    HBC1K -  Enter promo code on checkout to receive a 10% discount on orders ≥$1,000. 

     

    Please submit a quote request form for volume pricing ≥25 pieces.

     

    Shipping: All website orders >$100 are eligible for free ground shipping within the United States

     

    In Stock: product normally ships within 24 hours. 

     

    Condition: New / Unused

     

    Product Datasheet: HBControls HBC-x60 Series Solid-State Relays

  • Solid State Relay / Heat Sink Assemblies:

    Fully assembled solutions with heat sink and HBC-A6090 (Crydom CMA6090) solid state relay:

     

    HBC-690CHAA40 amp @ 40°C DIN mount solid state relay / heat sink assembly

     

    HBC-690CHAL50 amp @ 40°C DIN mount solid state relay / heat sink assembly

     

    HBC-690CHAXK60 amp @ 40°C DIN mount solid state relay / heat sink assembly

     

    HBC-690CHAN70 amp @ 40°C panel mount solid state relay / heat sink assembly

  • Product Description:

    The HBC-A6090 is a Crydom CMA6090 solid state relay private-labeled exclusively for HBControls and used in our popular C series stripwire power controllers. Other than the label, the HBC-A6090 is identical to the Crydom CMA6090, capable of switching 90 amp loads at line voltages between 48Vac and 600Vac when mounted to a suitable heat sink. The output circuit utilizes two SCRs configured in inverse-parallel, ideally suited for switching power in harsh industrial environments. Both SCRs are mounted to a direct bond copper (DBC) substrate to maximize thermal efficiency between the SCR junctions and the base plate of the solid state relay.

     

    The input of the HBC-A6090 solid state relay accepts control signals between 90Vac and 140Vac and requires <20mA of source current @ 120Vac to trigger the output semiconductors. The input and output of the solid state relay are optically isolated, providing 4kVrms dielectric protection between the AC mains and personnel / control circuitry. An LED input-status indicator allows for easy visual identification of the status of the solid state relay input circuit.

     

    The HBC-A6090 / CMA6090 has a zero-crossing output, which will not conduct load current when an input signal is applied until the AC supply passes through the zero crossing point of the sine wave. This greatly reduces inrush current through the load and reduces the level of conducted emissions coupled onto the AC mains.

                                                                       

    Box-clamp terminals can accommodate bare wires up-to 8 gauge for the output and 12 gauge for the input.

     

    Typical applications include resistive heating loads, motor loads, and other inductive loads with a power factor ≥0.5.  

     

    A heat sink is normally required in order to prevent the solid state relay from overheating during normal operation. The HBControls C series solid state relay power controllers utilize an HBC-A6090 / CMA6090 series solid state relay pre-assembled onto thermally efficient heat sinks and fully derated for operation in a 40°C ambient temperature.

Related Products

bottom of page