TP-90HDG 80 Amp / 48-530Vac Burst Fire Solid State Power Controller

Discount Codes:

HBC1K -  Enter promo code on checkout to receive a 10% discount on orders ≥$1,000. 

 

Please submit a quote request form for volume pricing ≥15 pieces.

 

In Stock: Product normally ships within 24 hours. 

 

Shipping: All website orders >$100 are eligible for free ground shipping within the United States

 

Condition: New / Unused

 

Users Manual: TP Series Users Manual

 

Product Datasheet: HBControls TP G Series Burst Fire Controllers

The HBControls TP-90HDG is a proportional output (burst fire) solid state power controller, utilizing a Crydom HD4890 solid state relay and a microprocessor-based control board. Fully assembled and ready-to-use, the TP-90HDG / HD4890 solid-state relay provides 0% to 100% power to resistive loads in proportion to the analog input provided. The TP-90HDG is rated to 80 amps at line voltages between 48Vac and 530Vac, and ideally suited to resistive heating applications where precise temperature control is desired.

 

The output circuit of the Crydom HD4890 consists of two SCRs configured in inverse-parallel (back-to-back) capable of withstanding surge currents up-to 1,200 amps (non-repetitive). Furthermore, the SCRs are mounted to a DBC substrate (direct bond copper), which minimizes thermal excursions and enhances overall life expectancy. This enables the TP-90HDG to operate safely and reliably in harsh industrial applications with MTBF ratings in excess of 7 million hours.

 

The TP-90HDG can accept a wide range of analog inputs, including; 0-10Vdc, 1-5Vdc, 2-10Vdc, 1-5Vdc or 4-20mA. An external potentiometer can also be used to control the amount of power applied to the AC load.

 

The microprocessor-based control board requires an external 24Vac power supply. HBControls offers a range of power supplies perfectly suited for the TP series power controllers. The TP-90HDG is also available with a 24Vac power supply pre-assembled onto the assembly (“PS-xxx” option).

 

Operation Mode:

 

Burst Fire: The output of the TP-90HDG / HD4890 provide a series a full AC cycles to the load, with the ratio of on/off cycles directly proportional to the analog input provided. For example, if the selector switch on the control board is set to 0-10V, then the percentage of power applied to the load will be directly proportional to the 0-10V analog input. If the signal is at 5V, the output will conduct load current for a few cycles and then turn off for an equivalent number of cycles, effectively applying 50% power. If the load is a heating element and the temperature starts to go beyond the set-point with 50% power being applied, then the controller might reduce its output to 4V. If so, then the solid state relay would reduce its output power to 40% by adjusting its on/off ratio to 40%.  

 

Additional Features & Benefits of the TP-90HDG / Crydom HD4890 include:

• True linear output controller with selectable soft-start, suitable for resistive or inductive loads
• Selectable analog input; 0-10Vdc, 1-5Vdc, 2-10Vdc, 1- 5Vdc, 4-20mA or potentiometer
• Line-voltage compensation with automatic 50/60Hz operation
• Compact, thermally efficient heat sink to maximize overall product life expectancy
• Direct-bond copper (DBC) substrate for superior thermal performance
• MTBF > 7 million hours (>800 years)
• Agency approvals; UL, CSA, VDE/TUV, and CE

 

Please visit our Proportional Controllers page for versions with different control modes and load current / line voltage ratings. Our technical team is ready to help at support@hbcontrols.com / 800.879.7918 if you’d like to receive more information on our proportional solid state relay power controllers.